|
 This edition of the WL addresses a common requirement of every code compliant connection, inspection and testing equipment verification.
This code requirement includes welding, bolting, measurements and pressure.
Businesses that sell connections or weldments have the obligation to comply with the contract and applicable codes and confirm that all equipment is working properly.
To achieve equipment compliance requires verification to an approved Quality Management System (QMS). The QMS is a system to establish policy, objectives, plans, and resources to direct and control an organization with regard to quality.
In today’s business environment, equipment compliance is verified in accordance with a firm’s approved QMS following the principles of the International Organization for Standardization (ISO) 9000 series or an accepted equivalent. ISO is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.
The details describing the QMS shall be documented and shall be available upon request. The needfor registration and/or certification of the QMS shall be the responsibility of the project owner.
To improve our business operations, WJMG secured ISO 9001:2000 certification. TheWJMG QMS is certified in the applications of inspection, testing, training and certification ofmeasurement devices. Our ISO 9001 QMS certification ensures quality and consistency of all our results – every time!
WJMG performs verification and certification of measuring devices services to our clients. Instead of shipping your instrument and waiting weeks for its return, why not bring it to someone locally that you know and trust? Our in-house testing laboratory allows us to provide the time and attention your project requires.
|
AISC – Fabricators |
AISC Certification Program for Structural Steel Fabricators |
AISC – Erectors |
AISC Certification Program for Structural Steel Erectors |
AWS D1.1 |
Structural Welding Code – Steel, requirements for design, fabrication, erection and NDT of welded steel structures. Applies to steel > 1/8” thick and ≤100 ksi. |
AWS D1.2 |
Structural Welding Code – Aluminum, requirements for design, fabrication, erection and NDT of welded aluminum structures. |
AWS D1.3 |
Structural Welding Code – Sheet Steel, requirements for design, fabrication and erection of welded sheet steel structures. Applies to sheet steel < 3/16” thick. |
AWS D1.4 |
Structural Welding Code – Reinforcing Steel, requirements for design, fabrication erection and NDT using reinforcing steel material. |
AWS D1.5 |
The Bridge Welding Code. Design, fabrication, erection, NDT of welded steel bridges. |
AWS D1.6 |
Structural Welding Code – Stainless Steel, requirements for design, fabrication, erection and NDT of stainless steel structures and components. |
AWS D14.3 |
Specification for Welding Earth Moving and Construction Equipment |
AWS D17.1 |
Specification for Fusion Welding in Aerospace Applications |
AWS Z49.1 |
Safety in Welding, Cutting and Allied Processes |
ASME Section V |
Non-Destructive Examination |
ASME Section VIII |
Division 1, Unfired Pressure Vessels |
ASME Section IX |
Welding and Brazing Qualifications. WPSs, PQRs, and WQTRs |
ASME B31.1 |
Power Piping- design, materials, fabrication, erection, test and inspection |
ASME B31.2 |
Fuel Gas Piping - design, materials, fabrication, erection, test and inspection |
ASME B31.3 |
Process Piping - design, materials, fabrication, erection, test and inspection |
ASME B31.4 |
Liquid Transportation Systems for Hydrocarbons, liquid petroleum, etc. |
ASME B31.5 |
Piping Refrigeration- design, materials, fabrication, erection, test and inspection |
ASME B31.8 |
Gas Transmission & Distr - design, materials, fabrication, erection, test & inspection |
ASME B31.9 |
Building Services Piping - design, materials, fabrication, erection, test & inspection |
ASME B31.11 |
Slurry Transportation Piping Systems – design through inspection |
API 570 |
Piping Inspection Code |
API 579 |
Fitness for Service evaluation methods; Levels I, 2, 3, 4 |
API 620 |
Design & Construction of Large, Welded, Low-Pressure Tanks |
API 650 |
Welded Steel Tanks for Oil Storage |
API 1104 |
Welding of Pipelines and Related Facilities |
WJMG has in-house, certified laboratory capabilities to analyze alloy compositions, mechanically test materials and nondestructively examine welds. We utilize standardized procedures for reproducible results. For over 35 years we have successfully provided knowledge obtained by our experience, education and tests to help our clients identify metals and solve their materials joining problems.
|
|
|
|
- Standards & specifications
|
- Metallurgical evaluations
|
|
|
It is important for the output of your welding power supply can be adjusted to the proper volts and amperes which are essential variables in your WPS, PQR and Welder certifications. Routine verification of your welding machine’s performance also provides you a chance to clean filters, repair frayed leads, or replace damaged ground clamps and electrode holders. Welding machine do break-down internally and thermally wear-out to the point of being unusable for code welding. Call WJMG today for more details about instrument verification |
9001:2000 Certification, What that means for you:
